# Ceiling Honeycomb Blind System
Source: https://www.fenetresystems.com/en/ceiling-honeycomb-blind/

# Ceiling Honeycomb Blind

Single-cell arrangement working on the horizontal glass surface. The light shade solution on the roof light.

## How Does the Single Cell Work on a Ceiling?

The tensioning arrangement fighting gravity lightens with a single layer.

On the ceiling panel the honeycomb fabric sits parallel to the floor; gravity wants to pull it down. Tension cords running through both ends hold the panel on the plane — the system works under tension.

Single-layer fabric carries a critical advantage on the horizontal plane: less load lands on the panel, the tensioning strains less, and sag resistance is preserved on wide openings.

Roof glass is a space’s hottest spot: the summer sun strikes straight from above. The single-cell pockets meet the heat by holding air on the glass plane; the motorised variant removes the reach problem on high ceilings.

## Standout Parts of the System

Tension cords, twin rails and the single-cell panel are the system’s identity.

- Horizontal Tension The single-cell panel works on the horizontal plane; tension cords hold it against gravity.
- Lightweight Horizontal Panel Single-layer fabric puts little load on the tensioning on the horizontal plane; sag resistance comes from the fabric’s lightness.
- Honeycomb-Pocket Ceiling On the roof-glass plane the single-cell pockets hold air; the sun is met at the glass.
- Motorised Option At unreachable height the motor drive runs at a single touch.
- Made to Measure Measured production for roof windows and winter-garden glass.

## Who Is the Ceiling Honeycomb For?

Places wanting shade and a light solution on overhead glass.

On a roof window the single-cell panel meets the summer sun at the glass plane; in the sheer option daylight enters filtered.

On the winter-garden ceiling module-based mounting manages each glass bay separately; the single layer does not strain the tensioning even on wide ceilings.

Where an extra insulation layer is wanted on the ceiling line in winter, the [ceiling duette blind](https://www.fenetresystems.com/en/ceiling-duette-blind/) is described on a separate page; on vertical wall windows the ceiling arrangement is unneeded.

## Frequently Asked

Does the ceiling panel sag?

Tension cords hold the panel on the plane; the single layer’s lightness is a natural advantage against sag on the horizontal plane.

Is electricity needed?

The manual version works with an extension rod; on the motorised version a rechargeable or wired motor is chosen.

Does the winter garden cover the whole ceiling?

A separate panel mounts to each glass module; the ceiling is solved module-by-module, not as one fabric.

Does it cut sunlight?

Near-total cut with blackout fabric, filtering with sheer fabric.

The atrium and roof-glass types where the horizontal plane mounts are given in the [roof-window application](https://www.fenetresystems.com/en/roof-window-honeycomb-blind/); angled slopes work on the [sloped system](https://www.fenetresystems.com/en/sloped-honeycomb-blind/).

## Send the Ceiling-Glass Measurement

With the roof-window type and net measurement, a ceiling honeycomb production and mounting plan is relayed.

[Request a Quote](https://www.fenetresystems.com/en/contact/) [WhatsApp](https://www.fenetresystems.com/en/whatsapp/)