# Horizontal Honeycomb Blind System
Source: https://www.fenetresystems.com/en/horizontal-honeycomb-blind/

# Horizontal Honeycomb Blind

Single-cell honeycomb sliding on a side rail. The lightweight companion that does not strain the rail on long sliding spans.

## How Does the Horizontal Single Cell Work?

The fundamental difference from the vertical arrangement is travel direction and panel weight.

In this arrangement the single-cell honeycomb folds left-right rather than up-down. The panel stays suspended in the side rails; pulled, it gathers into a slim bundle on one edge.

It shares the sliding door’s logic: the panel slides toward the wall or fixed glass and the passage opens completely. The single-layer fabric does not strain the rail wheels on long sliding openings.

On passage lines with frequent open-close a light panel relaxes the mechanism; while closed, the honeycomb pockets keep up the air barrier on the glass plane.

## Standout Parts of the System

Side rail, single-cell panel and gathering cassette are the system’s identity.

- Side-Rail Travel The single-cell panel moves on the horizontal axis, not vertically; the opening clears from above.
- Lightweight Sliding Panel Single-layer fabric does not strain the rail on long sliding spans; a slim bundle gathers to the side.
- One-Hand Passage Pushed open by the handle; the path to the door clears completely.
- Rail-Protected Panel The gathered panel rests in the side cassette, protected from impact and dust.
- Made to Measure Exact-measure production for wide sliding openings.

## Who Is the Horizontal Honeycomb For?

Places wanting a light, frequently used cover on sliding and wide façades.

On sliding balcony and garden doors a vertical panel wants swing room; the horizontal honeycomb slides in the door’s own direction and asks no extra space.

On a wide glass façade the panel splits in two or gathers on one side; on twin rails two panels can meet in the middle.

If an extra layer is wanted at the façade’s biggest heat leak, the [horizontal duette blind](https://www.fenetresystems.com/en/horizontal-duette-blind/) is described on a separate page; on a vertically opening window the standard vertical arrangement is preferred.

## Frequently Asked

Does the horizontal panel block door passage?

The gathered panel stays a slim bundle on one edge; the single-layer build keeps the bundle compact.

Can it be double-panel?

Two panels slide opposite each other on two rails; a centre-meeting arrangement is built on wide façades.

Is single-cell advantageous on sliding openings?

On long rail lines panel weight is critical; single-layer honeycomb does not strain the rail wheels and runs comfortably on frequent open-close.

Does it fit a glass balcony?

The rail arrangement adapts to the glass-balcony profile; rail measurements are stated on the order.

The window types where horizontal gathering is used are given in the [application pages](https://www.fenetresystems.com/en/honeycomb-blind-application-areas/); its vertically opening sibling form works on the [vertical system](https://www.fenetresystems.com/en/vertical-honeycomb-blind/).

## Send the Opening Measurement

With the sliding rail type and net measurement, a horizontal honeycomb production and mounting plan is relayed.

[Request a Quote](https://www.fenetresystems.com/en/contact/) [WhatsApp](https://www.fenetresystems.com/en/whatsapp/)