# Laboratory Pleated Blind
Source: https://www.fenetresystems.com/en/laboratory-pleated-blind/

# Laboratory Pleated Blind

Pleated blind in the laboratory. Precise light control, closure in the sample area and sterile-cleaning fit. Chemical-resistant, gives controlled daylight.

## Laboratory Analysis

The laboratory glass is part of the controlled environment. Daylight disturbs the sample and the measurement. The outside view puts the work at risk. At full closure the pleated blind cuts the light. When open it gives adjusted daylight. The wipeable fabric suits the cleaning rule.

### Light Sensitivity

In light-sensitive samples and measurements the blind fully closes. The outside light is cut completely.

### Work Privacy

The blind cuts the outside view. The work and the device stay away from the outside eye.

### Sterile Cleaning

The wipeable fabric suits the sterile-surface programme. A disinfectant-resistant series is taken.

### Controlled Daylight

In the process unaffected by light the blind stays open. The band position gives daylight to the bench.

## Light Control and the Hygiene Surface in the Laboratory

The light need changes by the process. The sample-reading and microscope area wants no glare. The preparation section benefits from daylight. The [stepless pleated position](https://www.fenetresystems.com/en/pleated-blind-systems/) sets the balance per the device line. In the critical partition [full blackout](https://www.fenetresystems.com/en/blackout-pleated-blinds/), on the general façade a semi-transparent series is taken.

Hygiene and chemical resistance give the fabric selection. In the clean room and the analysis laboratory the surfaces are wiped with disinfectant. The pleated fabric’s wipeable texture suits this routine. The lint-free fabric does not harm the measurement environment.

The device-window distance is written onto the [mounting](https://www.fenetresystems.com/en/pleated-blind-installation-types/) plan. A device taking direct sun produces temperature fluctuation and optical deviation. Full closure is fitted to the units at the device line. The unit list is approved from the layout plan, it is installed in a single round.

On the corridor partition glass the view is made two-way. The inside is invisible from outside, the corridor movement does not disturb the inside. The half-open band closes the eye level in both directions. At a critical process full closure is taken with a single move.

In the sample and archive area the light rule is different. UV-sensitive chemicals and samples are protected from direct sun. In this partition the blackout layer never opens, the unit stays fixed.

Mounting is built outside working hours. While the device is on, shaking and dust are not wanted. The team complies with the cleaning rule; the units are fitted in a single pass without disturbing the setting.

In the dark room with optical devices the unit is produced with full closure. The rail channel and the side guide cut the light leak. Leak lines like the door threshold and the air grille are solved separately in the project.

Staff and device changes do not disturb the unit order. The unit stays fixed on the joinery; when the device moves the setting is renewed with a single move. Flexible layout is compatible with stepless control.

In the fume-hood section where chemical vapour is drawn densely, the unit material is reviewed separately. Instead of the standard series a chemical-resistant fabric and a closed rail are fitted. The fume-hood distance is written on the measurement form.

At the opening hour the units are taken to the sun position. The morning routine runs with the device warm-up. At the end of work the blackout units close, the sample area is sealed for the night.

Application Notes

## Mounting & Selection for Laboratory

### Chemical Resistance

In the vapour and disinfectant condition the fabric is taken from the chemical-resistant series. The hardware resistance is confirmed.

### Bench and Wall Order

The bench and wall order gives the mounting place. The window top or the partition glass is checked.

### Closure Frequency

A blind frequently opening and closing wants a sturdy mechanism. Continuous use is accounted for.

Explore

## Related Pages

Laboratory — light sensitivity, work privacy, sterile cleaning, controlled daylight.

[Pleated Blinds for Healthcare & Education Buildings](https://www.fenetresystems.com/en/pleated-blinds-for-healthcare-education-buildings/) [Pleated Blinds](https://www.fenetresystems.com/en/pleated-blinds/)

## Per the Light Condition

Once the light-affected process and the measurements arrive, the closure type and the sterile fabric are taken.

[Request a Quote](https://www.fenetresystems.com/en/contact/) [WhatsApp](https://www.fenetresystems.com/en/whatsapp/)