Application Areas
The product name does not need to be known. Once the space and the need are described the right product group is chosen. The application areas of the eight product lines are listed below.
Spaces by Product Line
More than one product group can work on the same opening. What gives the selection is the condition of the space. On the balcony door the passage density points to the pleated insect screen, on the roof window the slope to the tensioned pleated blind, on the exterior façade the wind to the zip screen. The pages below hold the spaces where each product line is applied and the technical notes that decide the selection.
Insect Screen Application Areas
6 application areas, 4 selection notes
ViewPleated Insect Screen Application Areas
6 application areas, 4 selection notes
ViewPleated Blind Application Areas
6 application areas, 4 selection notes
ViewHoneycomb Blind Application Areas
6 application areas, 4 selection notes
ViewDuette Blind Application Areas
6 application areas, 4 selection notes
ViewVenetian Blind Application Areas
6 application areas, 4 selection notes
ViewZip Screen Application Areas
6 application areas, 4 selection notes
ViewCurtain Application Areas
6 application areas, 4 selection notes
ViewGuidance
Describe the Space. The Product Is Decided
Window, door, glass balcony or exterior façade. Once the application area is known the product group is chosen over technical requirements.
When it is not certain which product is suitable, the photo and the measurement of the opening are conveyed. The product group, model and mounting type are suggested by the technical requirements.
Describing the Opening Is Enough
Once the space photo and the measurement are conveyed the suitable product group, model and mounting type are suggested together.
