Custom-Print Honeycomb Blind
The customer’s own file — a logo, photo or corporate pattern — printed onto cellular honeycomb fabric: a personalised insulated model.
- Your Own FileCorporate artwork printed on honeycomb fabric.
- Insulation PreservedThe cell pocket is unaffected by the print.
- Proof-ApprovedNo design enters production unapproved.
Who Is the Custom-Print Honeycomb Blind For?
- Hotel Room
- Showroom Glazing
- Branch Facade
- Open Office
- Expo Stand
For institutions wanting to carry their brand onto the glass while keeping the heat inside; those looking for catalogue motifs look at the Printed model.
Custom-Print Honeycomb Blind
- Stock Code:
- FS-BAH-02
- Availability:
- Produced to Order
- Brand:
- FENETRE
- Category:
- Printed Honeycomb Blinds
The file is framed to the cell rhythm, a proof approval is taken and the approved design is printed to measure and shipped install-ready.
On corporate glass facades two needs collide: the brand must show and the heat must not escape. This model gives both on a single surface; printing does not start without proof approval.
The artwork is framed to the window size, placed with the cell rhythm in mind and produced after approval. On the cord-free system the fabric stays where it is left.
Technical Specifications
Custom-Print Honeycomb Blind build specification
- FabricCellular surface printed with the customer file
- Custom-Print Honeycomb Fabric
- SectionInsulation pocket with trapped air
- Hexagonal Single Cell
- ProfileStandard honeycomb body profile
- 6063 Aluminium
- Print SourceVector or high-resolution file
- Logo · Photo · Pattern
- ApprovalNo unapproved visual goes to print
- Proof Mandatory
- MountingDrilled, drill-free and motorised options
- Bead · Inside Recess · Wall
On bead and inside-recess mounting the honeycomb layer covers the glass plane; the printed face looks into the interior.
On tall shopfronts and unreachable glazing the motorised variant is applied; the adhesive arrangement is chosen where drilling is unwanted.
- The window’s clear width and height is measured (cm); this measurement also sets the print framing.
- The artwork file is sent with the measurement; if no vector exists the highest-resolution version is requested.
- When the proof visual arrives the framing and cell alignment are checked; production starts with written approval.
On multi-sash facades each sash’s measurement is written separately; the same file is applied to different ratios with separate framing.
File, cell texture and framing
Honeycomb fabric is not a flat canvas; the hexagonal rows give the surface a horizontal texture. Fine lines and small-type text are not set onto cell joins — the placement is adjusted to the cell rhythm on the proof.
Vector logos and drawings print sharp at any size. On photos the file needs to carry enough pixels at the window scale; insufficient resolution is caught at the proof and a new version is requested.
A visual whose ratio does not fit is reframed. On a shopfront the critical element — logo, face, slogan — is kept away from cell lines and edge allowance; the approval is given for this placement.
Brand + insulation on the corporate scene
On a hotel or showroom facade the branded glass is also the building’s heat leak. The printed honeycomb layer slows the glazing’s cooling while turning the shopfront into the corporate colour.
On a branch chain the same file is applied to different window ratios; every size takes its own framing, the corporate language is preserved. The same flow runs from a single order to a multi-facade project.
In an open office a pattern printed onto a glass partition is both privacy and a brand surface; the cell section also supports the meeting area’s heat comfort. For dealers and designers the process is described on the Private Label Manufacturing page.
Process discipline and afterwards
The flow is clear: the measurement and file arrive, the framing proof is sent, printing starts with written approval. No unapproved visual enters production.
Screen colour and fabric colour differ; where the corporate colour is sensitive the tone is settled together over the proof output. The honeycomb ground’s natural texture gives the colour a soft base.
On a campaign or logo change the system is not dismantled; the rail and mechanism stay in place, only the honeycomb fabric is renewed. The usage right of the visual belongs to the sender.
Questions About Custom-Print Honeycomb Blind
Does my own file break the insulation?
Which file should be prepared?
How does it work with many branches?
Does the logo colour come out one-to-one on fabric?
What is its difference from the catalogue print?
Other Printed Honeycomb Blinds Models
Custom-Print Honeycomb Blind is built around your own file, insulation preserved, proof-approved. The remaining 1 models in the Printed Honeycomb Blinds range are listed.
Custom-Print Honeycomb Blind — Send Your Measurements
Once the window measurement and artwork file are sent the proof and current cost are shared.
