Surface-Mounted Fixed Insect Screen
Surface-mounted fixed insect screen — a snap-off frame held to the outer face. No inner depth is sought; suits depth-less joinery.
How Is Surface Fitting Done?
Opposite clips are seated on the outer surface; the frame is fitted in a single move.
- 1
The outer surface is measured
The outer-profile width the frame will sit on is taken; the plane where the clip base will fit is found.
- 2
The clip bases are marked
Clip points are marked at equal intervals on the two opposite edges; deviation spoils the panel's sitting straight.
- 3
The clips are fixed
The bases hold with a screw or strong tape. The load is divided; a clip left at a single point loosens.
- 4
The panel is fitted and locked
The frame is pushed onto the clips; the spring pressure draws the panel to the channel. At removal the clip is freed.
On Which Joinery Is Surface Fitting Chosen?
It is the only solution of joinery having no inner channel or being narrow. It is the fastest snap-off at cleaning.
Depth-less joinery
On aluminium and thin PVC joinery there is no inner channel; the outer surface is the only connection plane.
A place wanting frequent removal
On an opening where cleaning and wintering are done often the outer clip removes in a second; recess fitting looks for a channel.
Double-sash joinery
Where the sash touches the sash inside, recess fitting clashes; the outer surface stays clash-free.
Surface vs Recess Fitting Comparison
| Subject | Surface Fitting | Recess Fitting |
|---|---|---|
| Connection place | Outer surface | Inner channel |
| Façade look | A thin profile line | Invisible |
| Inner depth | Not needed | Required as deep as the frame thickness |
| Removal speed | Seconds | Looks for a channel |
The Outer Clip's Correct Seating
The clip pressure draws the panel onto the outer-profile surface; a seated panel does not vibrate in wind. If the pressure is weak sound and leakage begin at the panel edge.
The clip bases remaining on the outer surface take UV and rain; the reinforced-plastic or metal clip choice decides the life. With a yearly check a loosened clip is renewed.
Questions About Surface-Mounted Fixed Insect Screen
Does it fit joinery having no inner channel?
Does it come off in wind?
How does it look on the façade?
Related pages: Recess-Mounted Fixed Insect Screen · Insect Screen Installation Types
Send the Joinery Photo
Once the outer-profile look and the measurement are shared the clip arrangement and the cost are reported.
