Custom-Print Duette Blind
The customer's own file — logo, photograph or brand pattern — printed on dual-cell duette fabric; the strongest insulated personal surface of the range.
- Your Own FileThe brand image is printed on the dual layer.
- Two Pockets PreservedThe insulation section is unaffected by the print.
- Proof-ApprovedAn unapproved design does not enter production.
Who Is the Custom-Print Duette Blind For?
- Boutique Hotel
- Premium Office
- Winter-Garden Shopfront
- Gallery Façade
- Architectural Project
For those who want the strongest insulation with their own image; those seeking a catalogue motif look at the Printed Duette page.
Custom-Print Duette Blind
- Stock Code:
- FS-BAD-02
- Availability:
- Built to Order
- Brand:
- FENETRE
- Category:
- Printed Duette Blinds
The file is framed to the dual-layer rhythm, printed with proof approval and sent as an installation-ready set.
The brand façade and the heat escape meet on the same glazing plane: the image is applied to the outer membrane, the two air pockets behind work independently of the print. Production does not start without proof approval.
The file is framed to the window measurement and placed with the dual-layer texture taken into account. In the cord-free system the fabric stays at the set position; the gathered stack stays tidy.
Technical Specifications
Custom-Print Duette Blind manufacturing spec sheet
- FabricDual-layer surface printed with the customer file
- Custom-Print Duette Fabric
- SectionAn insulation build with two air pockets
- Cell-in-Cell
- ProfileA body suited to the dual-layer depth
- 6063 Aluminium
- Print SourceVector or high-resolution file
- Logo · Photo · Pattern
- ApprovalAn unapproved image does not enter printing
- Proof Mandatory
- MountingDrilling, drill-free and motorised options
- Bead · Inside Recess · Wall
Bead mounting seats the printed dual layer on the glazing bead; two pockets work best in a position close to the glazing plane.
On a high shopfront the motorised variant steps in; the adhesive arrangement is used on surfaces where drilling is unwanted. The image faces the interior.
- The net width and height of the window is taken in centimetres; the measurement also determines the print frame.
- The image file is conveyed together with the measurement; if there is no vector, the highest-resolution version is sent.
- The recess measurement is added for the dual-layer depth; production starts after the proof approval.
The dual cell is thicker than a single layer — in inside-recess mounting the depth allowance is written into the measurement; in a narrow recess bead is recommended.
The file's relationship with the dual layer
The dual-cell fabric gives a thick ground; the image is applied to the flat face of the outer membrane yet the two layers behind let the texture be felt. Fine lines are not placed on cell joints — the layout is adjusted to the section rhythm at the proof.
A vector logo prints sharp at every size; a photograph needs enough pixels at the window size. The soft texture of the dual layer gives the image a fabric-based character.
A file whose aspect ratio does not fit is re-framed; the logo and critical elements are kept away from the edge allowance and the cell line. Approval is given to this final placement.
The strongest insulation of a branded glazing
On a boutique-hotel and premium-office façade the brand look and energy comfort coincide; the printed dual layer gives both on the same plane — while the shopfront carries the brand colour, the two pockets brake the glazing's heat exchange.
In wide-glazed spaces like winter gardens and galleries the image is not only décor: the double cell brakes summer solar heat and winter room-heat escape; the printed surface is the signature of that technical work.
In chain branches the same file is applied to differently proportioned glazings; every measurement takes its own frame and the corporate identity is preserved. For the dealer and project channel the flow is described on the Private-Label Manufacturing page.
Approval, production and afterwards
The process has three stops: measurement and file, framing proof, written approval. No unapproved design enters printing; this rule is the same on a single-unit order and on a multi-façade project.
A corporate colour differs between screen and fabric; the tone is finalised over the proof output. The natural texture of the dual-layer ground gives the colour a soft base.
On a campaign change the system stays in place; only the dual-layer fabric is renewed. The usage right of the image belongs to the sender.
Questions About Custom-Print Duette Blind
How is printing applied on the dual layer?
How is it understood whether the file quality is enough?
Is the same pattern applied on multiple windows?
Does the colour come out like on screen?
What is its difference from catalogue-printed duette?
Other Printed Duette Blinds Models
Custom-Print Duette Blind is built around your own file, two pockets preserved, proof-approved. The remaining 1 models in the Printed Duette Blinds range are listed.
Custom-Print Duette Blind — Send Your Measurements
Once the measurement and image file arrive, the duette price is shared together with a proof.
