Skip to content
FENETRE Systems — Insect Screen and Pleated Blind Systems

Horizontal Zip Screen

The form for horizontal and sloped planes. The fabric travels on two side rails and works without bagging under counter tension.

The System’s Four Parts

In the horizontal form the tension holds the plane, the rails carry the fabric.

  • Motorised CassetteThe rolling unit mounts on one edge of the opening. The fabric leaves the cassette and crosses the plane.
  • Side Guide RailsTwo profiles carrying the fabric edges on the horizontal plane. The main element preventing sag.
  • Tensioning UnitThe counter-pull system keeping the fabric taut on the plane. The sine qua non of the horizontal form.
  • Carrying Bottom BarThe moving profile at the fabric tip. On reaching the open edge the tension is locked.

Application Areas

Three typical sections. In each, the cassette on one edge, the rails on two sides.

Horizontal zip screen application areas and notes
AreaApplicationNote
Glass RoofShading above winter-garden and roof glassCuts the heat above the glass
Pergola TopHorizontal fabric covering the pergola openingTwin rails on rectangular sections
Sloped PlaneTaut fabric on angled glass surfacesThe tensioning unit is set to the slope

Standout Features

The technical meaning of top-down shading.

  • Sag-Free SurfaceTwo rails + counter tension keep the fabric flat — no bagging on the horizontal plane.
  • Heat ControlThe solar load cut above the glass never reaches the interior.
  • Compact CassetteIn the closed position the fabric fits the cassette; the opening clears completely.
  • Motorised StandardTravel and tension run on the motor; automation with sensors.

Questions About the Horizontal Zip Screen

Can the vertical zip be used horizontally?
No. The vertical system’s unit is designed for downward hanging. On the horizontal and sloped plane, a separate roof form holding the fabric with counter tension is required.
Can it mount to a glass roof?
Yes — that is this form’s main application. The cassette goes on one edge of the opening, the rails on the two sides; the carrying profile and section are verified at survey.
Does it carry a rain load?
This system is for shading — not a pergola cover designed for water drainage. The fabric is gathered in rain.

The planes where the horizontally opening zip arrangement is used are shown in the application areas; its vertical counterpart is given on the vertical system.

Let Us Draw the Section Together

With the opening measurement, slope and carrying-profile data the right tensioning unit is recommended.