White Blackout Pleated Blind
White full-blackout pleated blind. The model whose room-facing surface stays white on a foil-layered fabric; while cutting the light passing through the glass it keeps the blind itself airy.
- Bright SurfaceThe light is cut but the blind stays white.
- Foil LayerThe light passage through the fabric surface is zero.
- Cord-Free OrderNo hanging cord; suitable for homes with children.
Who Is the White Blackout Pleated Blind For?
- Baby Room
- Minimal Décor
- White Joinery
- Façade Harmony
- Small Space
The tone of those wanting darkness but not a dark-blind look — produced in a dark room, the blind stays bright.
White Blackout Pleated Blind
- Stock Code:
- FS-TKP-01
- Availability:
- Built to Order
- Brand:
- FENETRE
- Category:
- Blackout Pleated Blinds
The white foil-layered fabric is cut to measure and matched with a white profile. The installation-ready set is delivered in its protective packaging.
The blackout fabric's colour determines the room's atmosphere. Dark surfaces show the blind dark too; the white surface gives the same cutting with a bright blind line. This is the solution of rooms wanting darkness but not a dark blind.
White has one more technical advantage: the thin light line leaking from the edge produces little contrast on a light ground. The same line that catches the eye on dark fabric melts and disappears on the white surface.
The system is cord-free; the fabric is positioned by hand and stays at the height it is left. When gathered by day, a white pleated band remains on top and reads like a single surface with white joinery.
Technical Specifications
White Blackout Pleated Blind manufacturing spec sheet
- FabricWhite-surfaced foil-layered fabric
- White Foil Blackout
- BuildImpermeable build with aluminium foil
- Foil-Layered
- PleatBody folding in accordion order
- 15–20 mm Pleat
- ControlMechanism staying at the left position
- Cord-Free by Hand
- MountingIncluding bead sitting on the bead plane
- Bead · Inside Recess · Wall
- Edge LeakageThin line stays indistinct on white surface
- Melts on Light Ground
In bead installation the white fabric settles onto the glazing-bead plane; the white profile stands on PVC joinery not like an add-on but like the joinery's extension.
Inside-recess and over-wall installations are also made from the same body; in a rented home the drill-free adhesive carrier is used; on removal no mark remains on the surface.
On a wide façade two blinds are installed side by side; the joining share is included in the measurement.
- The joinery opening's net width-height is measured in cm.
- The installation preference is written: bead, inside recess or wall.
- The joinery white and the fabric white are held side by side in daylight; an undertone mismatch is eliminated at the start.
In blackout fabric the measurement ties directly to leakage performance. A millimetric difference changes the edge line; on the white surface this line is less noticeable but the measurement is still taken with tight tolerance.
The white-surfaced blackout's balance
The darkening is done not by the surface colour but by the foil layer inside the fabric. This distinction matters: choosing a dark colour does not increase the darkness, it only changes the blind's look. The white surface offers the same cutting performance with an airy look.
While the blind is closed the room darkens but the blind surface stands bright — this duality is what is sought in minimal décor. Even while the window is closed no dark stain forms on the façade; the white surface reads like the wall's continuation.
Looked from outside too the white surface gives a standard-blind look. On an apartment façade a bright plane is seen instead of a dark block; it naturally meets the façade-integrity expectation in complexes and mass housing.
White's advantage in edge leakage
No light passes through blackout fabric; the only escape left is the edge gap between fabric and frame. This thin line's visibility depends on the surface colour — while the bright line is distinct on dark ground, the same line blends into the eye on white ground.
Bead installation pulls the edge gap to the lowest share by seating the fabric onto the glazing bead. Combined with the white surface, the leakage line descends to minimum both physically and visually.
In inside-recess and over-wall installation the edge share widens; production takes the overflow share into account. The white surface is still more forgiving than dark tones — the same leakage produces less contrast.
In which room white blackout
The baby room is the first scenario: at the noon nap the room descends to dusk but the space's bright identity is preserved. The cord-free build also removes the cord risk.
In a small and low-lit bedroom a dark blind narrows the volume; the white surface gives the same blackout without losing volume. While closed the surface reads like the wall's natural extension.
For those wanting full darkness plus dual function, the sheer-layered dual version adds day filtering with the same white look. In rooms where a single layer suffices, the model on this page is enough.
Questions About White Blackout Pleated Blind
Does white fabric really black out fully?
Does light leak from the edge?
How does it look from the street?
Is it suitable for the baby room?
Does the white surface yellow over time?
Other Blackout Pleated Blinds Models
White Blackout Pleated Blind is built around bright surface, foil layer, cord-free order. The remaining 4 models in the Blackout Pleated Blinds range are listed.
White Blackout Pleated Blind — Send Your Measurements
Once the window measurement and installation preference are conveyed, the white blackout price is conveyed the same day.
