White Honeycomb Blind
White honeycomb blind. The model carrying the hexagonal-cell honeycomb fabric on a white face — it cuts the thermal bridge at the glazing edge while staying nearly invisible on the facade.
- Cell PocketThe hexagonal section traps air.
- Vanishing FaceThe blind goes invisible on white joinery.
- Heat BufferThe glazing cold is separated from the room.
Who Is the White Honeycomb Blind For?
- North Facade
- White Joinery
- Winter Garden
- Roof Window
- Minimal Space
The tone of those wanting the insulation unseen — the cell pocket works while the white face disappears on the facade.
White Honeycomb Blind
- Stock Code:
- FS-DUH-01
- Availability:
- Built to Order
- Brand:
- FENETRE
- Category:
- Plain Honeycomb Blinds
The white honeycomb fabric is built to measure with the cell section preserved. The set is delivered in protective packaging.
The cell structure’s job is to trap air: the still air enclosed between fabric layers builds a buffer between the cold surface of the glass and the room. In white this technical structure takes its lightest look.
On white PVC joinery the facade keeps its integrity even with the blind closed — the cellular fabric reads as an extension of the joinery with its white face. The insulation is there but the blind itself does not take the stage.
The cord-free system holds the fabric at any point; when gathered the cells collapse into a slim bundle at the top. In top-down use the sky stays open while the honeycomb layer covers the eye level.
Technical Specifications
White Honeycomb Blind manufacturing spec sheet
- FabricWhite cellular honeycomb fabric
- White Honeycomb Fabric
- SectionTrapped-air insulation section
- Hexagonal Cell
- ProfileSlim-bundle stacking structure
- 6063 Aluminium
- ControlControl holding at any point
- Cord-Free by Hand
- MountingBead sitting onto the glazing strip
- Bead · Inside Recess · Wall
- Light BehaviourDaylight filters through the white face
- Filtered Brightness
Bead mounting seats the white honeycomb fabric onto the glazing bead — the air pocket works most efficiently at the closest contact with the glass.
Over-wall and inside-recess mounting are also supported; the white profile integrates into light joinery.
A drill-free adhesive carrier exists — the honeycomb body is light enough for the adhesive surface to carry easily.
- The glazing or joinery opening is measured in cm as clear width-height.
- The mounting type to be applied is written: over-wall, onto bead or inside recess.
- The joinery white and the fabric white are compared in daylight — undertone mismatch is eliminated.
The air pocket’s efficiency depends on the fabric’s closeness to the glass plane — the recess depth is also written with the measurement.
How the invisible insulation works
The white honeycomb’s strength hides in contrast: the lightest-looking surface carries the card’s most technical structure. The air trapped inside the cell slows the heat exchange between the glass and the room — with the blind closed, the cold draft at the glazing edge noticeably drops.
On single-glazed or old joinery the difference is felt at once — the glass surface turns into a separate climate zone away from the room. The white face does this technical job without visual weight.
On a north facade sunlight is limited anyway; here the blind’s job is not light but heat. The white honeycomb layer filters the daylight by day and holds the heat inside at night.
Integrating with white joinery
In homes with PVC joinery the white honeycomb fabric reads as a continuation of the joinery. When profile and fabric are chosen in the same white family, no extra colour layer forms on the window frame.
This integration is especially valuable in minimal décor: with the blind closed the facade stays a seamless white plane. The blind’s presence is only understood by picking the cell texture up close.
On anthracite or dark joinery the white honeycomb produces a deliberate contrast — a bright surface inside a dark frame turns the window into a showcase.
On roof windows and winter gardens
Sloped roof windows and winter-garden glazing are the surfaces of the most intense heat loss. The light honeycomb body works stably on the sloped plane too — the air pocket forms even on a glass incline.
The top-down/bottom-up option is valuable on roof windows: while the top-opened section leaves the sky clear, the lower honeycomb layer keeps the privacy and insulation.
In a winter garden it works in summer as well — the heat coming through the glass is slowed in the honeycomb layer; the white face reflects the sun back instead of absorbing it, reducing the interior’s heating.
Questions About White Honeycomb Blind
Does the white honeycomb blind really cut heat?
Does it look exactly the same as white joinery?
Is the honeycomb layer full blackout?
Does it work consistently on a roof window?
Does the white surface hold dirt?
Other Plain Honeycomb Blinds Models
White Honeycomb Blind is built around cell pocket, vanishing face, heat buffer. The remaining 6 models in the Plain Honeycomb Blinds range are listed.
White Honeycomb Blind — Send Your Measurements
With the window measurement and joinery detail the white honeycomb price is sent the same day.
