Hallway Pleated Blind

Compact Unit and Privacy on the Hallway Window

Hallway windows are the home’s smallest openings. They exist as a ventilation fanlight or a narrow fixed pane. At this size roller and venetian mechanisms stay disproportionate while the pleated unit’s compact profile fits on the joinery and does not close the in-case volume. In the top-down model the blind is lowered only as much as needed. The small pane’s light contribution remains.

When the hallway faces the flat door, the inside can be seen through the peephole or the street line. Privacy is needed even on this narrow pane. Semi-transparent fabric does not show the inside from outside by day, it leaves the sky and daylight to the inside. The blackout series is unnecessary in the hallway. This space wants light, not darkness.

The on-joinery connection is especially meaningful in the hallway. The wall share around the case is generally narrow and can clash with the door case. The glazing-bead mounting sits the system on the joinery. Whatever the wall measurement is, the application is made.

The hallway volume is used for a short part of the day but is the home’s first welcome area. In the closed position the pleated fabric reading as a single-colour surface does not carry the visual crowd of venetians and rail systems. In the open position the slim gathering band does not break the small pane’s ratio.

The ventilation function is primary in the hallway. In the narrow volume where shoe and coat odour accumulates, the fanlight window is opened often. Since the on-joinery unit moves together with the sash, the blind’s open-close action does not block the air flow.

On hallway windows facing site and apartment entrances the privacy is two-way. Looked from the corridor the inside is seen, looked from the hallway the building entrance is seen. The bottom-up model keeps the eye level fixed and takes light from the top band. No light loss is experienced in the narrow volume.

At measurement the single point of attention is the case depth. On the narrow case the glazing-bead connection’s projection is accounted for. The unit must not close the opening sash’s movement area. The net measurement is taken from the joinery case. The wall share is not accounted.

In apartment entrances the hallway pane also carries a security function. It closes as an extra privacy layer beside the door’s peephole. The unit fitted on the outer door glass is kept at half position during entrance-exit hours.

The hallway’s furniture order is limited to the coat stand and the shoe cabinet. The window is mostly positioned above or beside the coat stand. The unit rail is aligned with the furniture line and the coat-stand depth is marked on the measurement so it does not clash with the opening sash.

The fixed pane above the door and the narrow side sash are the hallway’s two separate windows. Each is produced with its own measurement. The rail of the unit landing on the door’s opening path is kept away from the door movement. The hallway brightness comes from these small openings all day.

When the hallway lamp turns on in the evening, the home’s entrance is seen from the street. The door-glass unit is kept in the closed position and the entrance privacy stays uninterrupted. In the morning the unit opens and the hallway is lit with daylight. A single-move daily routine.