27 mm Pleated Insect Screen
27 mm pleated insect screen — the model with the deepest frame profile in the range. The series with the largest carrying margin where doors need wide openings and tall sashes.
- 27 mm FrameThe deepest profile section in the series.
- Double LayoutThe sashes meet in the middle.
- Tall SashPanel balance on tall openings.
Who Is the 27 mm Pleated Insect Screen For?
- Veranda
- Wide Balcony
- Commercial Entrance
- Double Opening
The deepest frame in the series — the carrier of the widest openings.
27 mm Pleated Insect Screen
- Stock Code:
- FS-PSN-05
- Availability:
- Built to Order
- Brand:
- FENETRE
- Category:
- Pleated Insect Screens
Frame, rail and mesh are produced to the 27 mm profile measurement. It arrives installation-ready with its tensioning complete.
The double layout shows itself in this series: two sashes meet in the middle, metres of opening close with a single system, and when needed the mesh gathers to one side.
Technical Specifications
27 mm Pleated Insect Screen manufacturing spec sheet
- Profile27 mm frame profile
- Aluminium
- MeshPleated polyester mesh
- Pleated Polyester
- MountingWith frame or wall screws
- Screwed / Double Layout
- ControlSingle / double sash
- Push by Hand
- CompatibilityThe widest openings
- Door · Window
Screwed mounting to the frame face. Single or double sash planning for wide openings is done at the measuring stage; the rail line is fixed to the floor.
The deep frame asks for recess depth or surface margin — the depth state of the mounting surface decides the fixing layout.
- The opening width and height are sent as clear measurements in cm.
- The depth where the frame will sit and the mounting surface are noted.
- The sash count (single/double) and the gathering direction are stated.
On wide openings the width-height measurement is verified from several points; a photo of the joinery is requested together.
The deep frame’s job
As the sash widens, mesh and profile weight grow; as the height lengthens, the load on the bottom rail increases. A slim frame bends under this load — the rail tires and the panel loses balance.
The 27 mm body shoulders the carrying. From a wide veranda opening to a commercial entrance, the system’s heaviest work is given to this frame.
Double: two sashes meeting in the middle
Where a single sash struggles at the width, the answer is to split it in two. In the double layout two panels work towards each other — each gathers to its own side and the passage stays free from both directions.
The industry mesh production limit is around 300 cm in height; in width it stretches to several metres with the double build. The exact limit is settled by the measurement.
Where it becomes overkill
On a standard window a 27 mm frame means unnecessary depth — the look thickens, the cost rises, and nothing is gained.
The right place is clear: wide doors, verandas, commercial passages and tall-sashed openings. Where the measurement does not call for 27 mm, the series below are the smarter choice.
Questions About 27 mm Pleated Insect Screen
What is the widest opening it can close?
How does the 27 mm differ from the 26 mm?
Can it be a single sash?
Other Pleated Insect Screens Models
27 mm Pleated Insect Screen is built around 27 mm frame, double layout, tall sash. The remaining 4 models in the Pleated Insect Screens range are listed.
27 mm Pleated Insect Screen — Get a Price
Send the opening and joinery information — suitability and pricing for the 27 mm series are shared by the production unit.
